• Set-Top Box
  • IP STB / Thin Client
  • DVB STB
  • Network Card
  • 300M Wireless LAN
  • 150M Wireless LAN
  • Wireless AC Dual Band
  • Ai Smart Speaker
  • Ai Smart Speaker
  • Wireless Module
  • USB Modules

    1200M Dual-Band Gigabit Mesh Route

  • Model:MT-WR1208AC
  • Description:Hardware features Interface 1*GE WAN/LAN multiplexing. 1* GE LAN. 2.4G uplink interface up to 300Mbps 5G uplink interface the highest rate is 866Mbps FLASH 32MB SDRAM 128MB DDR Button 1*Reset reset button hidden hole position. Indicators...
  • Details
    Hardware features
    Interface
    1*GE WAN/LAN multiplexing.
    1* GE LAN.
    2.4G uplink interface, up to 300Mbps
    5G uplink interface, the highest rate is 866Mbps
    FLASH
    32MB
    SDRAM
    128MB DDR
    Button
    1*Reset reset button, hidden hole position.
    Indicators
    Function
    Definition
    Color
    Breakdown
    Steady on: AP is disconnected from the internet.
    red
    Blinking: The AP is disconnected from the mesh network.
    The internet
    Steady on: The mesh configuration is complete and the network is reachable.
    blue
    Blinking: Mesh networking is in progress.
    system
    Blinking: during system startup
    green
    Steady on: The startup is complete and the mesh configuration is not enabled.
    Signal strength indicator
    Steady on: It is worse than other AP signals in the mesh network.
    yellow
    Antenna
    2*3.5DBI dual-band antenna.。
    Wireless
    Supports IEEE802.11B/G/N/AC with a maximum wireless speed of 1200MBPS.
    Wireless channel
    2.4G: 1~13 channels; 5.8G: 36-158
    Wireless transmit power
    <20dBm
    Power
    DC 12V1A (built-in)
    Environmental requirements
    Working temperature: -5 ° C ~ 40 ° C,
    working humidity: 10% ~ 90% RH does not condense.
    Storage temperature: -40 ° C ~ 70 ° C.
    Storage humidity: 5% ~ 90% RH does not condense.
    Software function
    Operating mode
    Router,Bridge、Repeater(Client+AP)
    QoS
    WMM
    Wireless security
    64/128-bit WEP,WPA-PSK / WPA2-PSK ,AES/TKIP
    Wireless power conditioning
    Support
    DHCP server
    Support
    Protocol
    Support for IPv4/IPV6
    Andlink
    Support
    Port forwarding
    Support
    Equipment management
    Local WEB manage
    System status
    Software upgrade
    Factory reset
    Device manager setup
    Log Management
    Equipment statistics information
    Diagnosis
    Ping and tracert test
    Wireless
    Wireless basic configuration
    Wireless security configuration
    Wireless access control
    Time synchronization NTP
    Support
    Mesh automatic networking
    The mesh router automatically recognizes that the user can choose to join the network on the web to complete the configuration.
    Support dual-band simultaneous networking
    Support 2.4G and 5G for mesh networking at the same time, automatically select the optimal frequency band in different environments.
    Mesh optimal path automatic selection
    Dynamically select the optimal data transmission path based on factors such as signal strength, interference, and bit error rate.
    Automatic identification of master/slave routes
    After the user is configured for the first time, any router can be used as the master/slave router.
    Configuration and firmware auto sync
    Automatically synchronize other routers after the primary router is configured, and upgrade other routers simultaneously when the primary router is upgraded.
    Intelligent roaming
    Automatically select roaming mode according to the roaming protocol supported by different wireless terminal devices
    Dual frequency intelligent connection
    Dual frequency is combined into one SSID, and the optimal frequency band is automatically selected when the wireless terminal device is connected